How often does the belt of the high-speed AT centrifugal blower need to be replaced
Friends who have used blowers should know very well that belts in blowers need to be replaced after being used for a long time, no matter what kind of blowers are the same. However, the belt replacement time of each blower is different. Take the AT centrifugal blower which is popular in the market now, how often does the belt of the AT centrifugal blower need to be replaced?
As an important link of the whole part of the AT centrifugal blower, the belt of the AT centrifugal blower has the function of button connection on the linkage of its motor and blower. However, the heating of blower belt is common in the process of blower, which often makes customers feel puzzled. Most of the time, we will consider whether there are quality problems in the blower. How to solve the belt fever of AT centrifugal better has become an urgent problem for users, so how to solve it better? We got the following points:
1. The cause of the belt problem of AT centrifugal blower is usually too loose, which will cause the belt of AT centrifugal blower to heat up. Better blower manufacturers will adjust the belt of the blower to a suitable tight state before the AT centrifugal blower leaves the factory, so as to ensure the smooth operation of the blower, because too loose belt will not only cause fever, but also cause the phenomenon of falling off and damage.
2. Not only too loose belt will cause heat, but too tight belt will also cause heat, and it will also affect the loss of blower during power transmission. Too tight belts are likely to break during operation, so it is not good whether they are too loose or too tight. Therefore, Manvac advises the majority of blower manufacturers to strictly test all indicators of blowers before leaving the factory, so as to ensure the operation of blowers and then deliver the products to our customers.
3. We suggest that it is more suitable to replace the belt of AT centrifugal blower in summer. Some customers don't know how to cool the belt of blower and splash water on the belt. Manvac tells you that this method is very wrong. Although it can make the belt temperature drop rapidly, it will seriously affect the fit between belt and pulley, and reduce the occurrence of insufficient power transmission and slippage caused by friction. In addition, if the water flows into the blower carelessly, the impeller in the blower will rust and the AT centrifugal blower will be damaged.
Winter and autumn are particularly important for the working environment of AT centrifugal blowers. Arranging blowers to work in a cool place will make your maintenance more effective. The above is the report of Manvac on the belt of AT centrifugal blower. Our engineers strive to achieve the combination of practicality and artwork when designing every part. We make continuous efforts to ensure the safe and worry-free operation of every AT centrifugal blower.
Spanish
English
manager@manvac.cn
+86-15014788350
