Effect of high-pressure blower in central feeding system

Home>Effect of high-pressure blower in central feeding system

Products Categories

Tel: 15014788350
Fax: 0769-22800432
Mob: +86-15014788350
Email: sales@manvac.cn
Add: Building C,Ming Zhi Shang Sha,Xi Ping,Nancheng, Dongguan City, Guangdong Province,China 523000

2023/3/31

Effect of high-pressure blower in central feeding system The central feeding system adopts the transportation method of high-pressure blower and vacuum pump. According to the centralized pipeline system, the plastic raw materials are transported from the discharge tank to the intermediate drying system, and then the dried raw materials are transported to each plastic feeder. The formulation method of "one equipment and one pipe" is selected for the intermediate conveying system to ensure the smooth operation of the whole system and absolutely no material blockage. It cooperates with the application of intermediate drying system, and dry gas can be used to transport raw materials to avoid the back tide of raw materials after drying. At the same time, after each conveying circulation system, the conveying pipeline is cleared to ensure that there is no residual powder in the pipeline, which prevents the raw materials from damp back and ensures the consistency of the characteristics of the raw materials in the plastic adding machine. Under the negative pressure of high-pressure fan and vacuum pump, the dust contained in raw materials will be filtered out according to the smoke and dust filtering system, which is beneficial to improve the quality of forming equipment. Principle of high-pressure blower: The impeller of MV series products is immediately installed on the motor wheel, which is completely non-contact reduction. Because the pump shaft is installed outside the reducing cavity, it can ensure the highest working stability of the equipment even under the large pressure difference during work. The standard air pressure is sucked in by the breathing port, but after it enters the side safety passage, the rotating impeller gives the steam a speed in the rotating direction. At the same time, the centripetal force on the leaves accelerates the steam outward and increases the working pressure. With the development of rotation, the mechanical energy of steam is improved, which further promotes the air pressure along the side safety passage. As the side safety passage becomes smaller at the outlet, the steam is squeezed into the leaves and the pump casing is discharged according to the outlet muffler. Characteristics of high-pressure blower: 1. Ultra-quiet type, no noise: the motor runs immediately, and after adding an integrated sound pin device, the phenomenon of high noise of high-pressure centrifugal blower is improved, and the actual effect of sound insulation is achieved.

TRY BEST! TO BE NO.1